Philips HP4648/37 User Manual page 9

- Always select a low heat setting when you start using the straightener
for the first time.
- For coarse, curly or hard-to-straighten hair, selected a medium
(120 cC) to high heat setting (160 cC).
- For fine, medium-textured or soft waved hair, select a medium
(120 cC) to low heat setting (100 cC)
- Take extra care with pale, blonde, bleached or colour-treated hair,
since it will be susceptible to damage at high temperatures.
The display shows the selected temperature and the remaining
,
time of the straightening session.
- Look at the display to see the temperature you have selected.
- The bars on the display show the remaining usage time of the
straightener. The total usage time is 60 minutes. Every ten minutes
one of the six bars will disappear.
1 Insert the plug into the wall socket.
 Press the on/off button.
The pilot light burns red to indicate that the straightener is heating up.
Ions are generated as soon as the straightener is switched on and are
released through the ion output holes.
 Let the appliance heat up. The default heat setting is 100 °C.
Never leave the appliance unattended when it is plugged in. Never put
the appliance on a surface that is not heat-resistant when it is heating
up and when it is hot.
 When the pilot light turns green the default temperature of 100 cC
has been reached. When the appliance has reached this
temperature, you can adjust the temperature to your preference.
(Fig. )
- Press the + button to increase the temperature or press the - button
to decrease the temperature. The display tells you which temperature
you have selected. The pilot light turns red to indicate that the
appliance is adjusting the temperature.
- The pilot light turns green when the selected temperature has been
reached.
EnglisH
9