Table of Contents
Advertisement
7
INSTALLATION
7.1
Software Installation
To configure a vision sensor, In-Sight Explorer software must be installed on a networked personal computer.
For information on how to obtain In-Sight Explorer, please contact your local Mitsubishi sales office or representative.
7.2
Registration of a Profile
To configure communication between a programmable controller and a vision sensor with an engineering tool, a profile of the
vision sensor needs to be registered to the engineering tool.
A profile is data that stores information of a connected device (such as a model name.)
By registering the profile to an engineering tool, vision sensors are added to "Module List" in the "Ethernet Configuration"
window and the "CC-Link IEF Basic Configuration" window.
For details on how to register profiles, refer to the following manuals.
GX Works2 Version 1 Operating Manual (Common)
GX Works3 Operating Manual
For information on how to obtain a profile, please contact your local Mitsubishi Electric sales office or representative.
7 INSTALLATION
51
7.1 Software Installation
7
Advertisement
Table of Contents
