Philips HF320/00 User Manual page 9

• Every time you press the MEMORY button, the data of the
measurement previous to the one currently shown will
appear on the display.
• The memory will be erased when you replace the
batteries.
Systolic pressure higher than 150 mmHg
If you switch the appliance on in the normal way, the
wristband will be inflated to 180 mmHg. If your systolic
pressure is higher than 150 mmHg, the appliance will have
to interrupt the measurement in progress in order to inflate
the wristband to the correct pressure. This will cause your
wrist to be squeezed tight for quite some time. You can
avoid this inconvenience by following the instructions below,
which will make the wristband inflate to the correct value
straight away.
- Put the wristband around your wrist.
- Sit down comfortably and hold the wristband at the same
height as your heart.
- Press the start button and keep it pressed in until the
value shown on the display is 40 mmHg higher than your
expected systolic pressure.
Example: if you expect your systolic pressure to be 160
mmHg, keep the START button pressed in until the value
shown on the display is 200.
Release the START button.
• The measurement will now take place fully automatically
as described in chapter "Carrying out the measurement".
9