Advertisement
Table of Contents
- 1 Installation Instructions
- 2 Handling Tips
- 3 Electrical Installation
- 4 STEP 1 - Fitting the Mounting Structure to the Wall
- 5 STEP 2 - Connecting the Mirror Lights to Power
- 6 STEP 3 - Hanging the Mirror on the Mounting Structure
- 7 STEP 4 - Removing the Protective Plastic
- 8 Care and Cleaning
- Download this manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Clearlight Designs Reverb
Summary of Contents for Clearlight Designs Reverb
-
Page 2: Installation Instructions
Installation Instructions Failure to follow installation instructions could result in Clearlight Designs assumes no liability for customer’s failure to serious injury, or damage to property. comply with these requirements. Failure to follow installation instructions will void warranty. Installation must only be carried out by a licensed electrician or Please read these instructions carefully before installation to make builder according to local authority regulations. - Page 3 STEP 1 - Fitting the mounting structure to the wall: The mounting structure is to be installed using a minimum of 5 button head screws of 8 gauge X 40mm length, combined with the appropriate wall plugs or expanding wall anchors depending on the type of wall and wall cladding. If the mounting structure lines up with a wall stud even better, just drill another hole/s in the White MDF and screw through into the wall stud.
- Page 4 STEP 2 - Connecting the mirror lights to power You need at least two people for this next procedure. • If there is no vanity cupboard in front of the mounting structure use a table or similar. Make sure you have folded towels or similar padding in place to rest the mirror on.
Need help?
Do you have a question about the Reverb and is the answer not in the manual?
Questions and answers