Troubleshooting - Whirlpool AKR6152IXDS-C Instruction Manual

The filters may also be washed in the dishwasher.
Before removing the filters, you should remove the outside filter first, then
pull the slide-out shell to the farthest distance position prior to removing the
inside filter.
When installing the filters, install the inside filter first with the slide out shell
in the farthest distance position, and then install the outside filter.
The aluminum panels may alter in color after several washes. This is not
cause for customer complaint nor replacement of panels�
Clean the fan and other surfaces of the cooker hood regularly using a cloth
moistened with denatured alcohol or non abrasive liquid detergent.

Troubleshooting

Problem
Hood doesn't work
Poor airflow
Motor running but
no airflow
Motor turns off after
a few minutes
Oil dripping onto
stove
Whirring sound
Possible reason
No electricity supply
Rangehood is folded
closed
Aluminum grease
filters clogged
Butterfly valve
jammed
High temperature
safety device
activated
The hood is installed
too near to the
cooking stove
Aluminum grease
filte rsaturated
Something in
contact with fan
blade
7
Solution
Check the olua is connected
Check that the main switch/
circuit breaker/safety switch is
turned on
Unfold the pull-out shell
Clean the filters and replace
when dry
Contact service department
The kitchen is not sufficiently
ventilated
The hood must be at least
650mm from stove
Wash the aluminum grease
filters
Contact service department