Washer doesn't operate while the lid is opened. If the lid is opened during the wash, rinse
or spin cycles, the operation stops for safety.
Pre Wash Normal
The purpose of this program is to deliver best Wash Performance by adding extra 8 minutes of uniquely
designed washing pattern before the main wash cycle.
Normal logic control
A built-in load sensor automatically detects the laundry
load and a microprocessor optimizes washing conditions
such as ideal WATER LEVEL and washing time.
Advanced technology is built into the Electronic Control System which ensures the best washing result.
When Washing pulsator turn, the washing tub turns in the opposite direction.
This makes the both sides current of water which improve wash-performance by rubbing
3 Step washing
3 step washing makes the best washing performance with low tangling.
: Be sure to remove the product from the carton base, otherwise the machine
will not be able to operate properly.
It is the technology to transmit the anomalies to the service center when there
is a problem with the washer. It provides the service that gives faith and trust
to the customers through precise and fast analysis.
Auto Restart allows the program to restart all by itself in case of power failure.
It does from the stage where it stopped.
Product feature may vary according to different models. Refer page 28 for modelwise features for your purchased model.
Water Level Sensor