Mitsubishi Electric apricot XEN-LS Installation Manual page 13

Installation
To fit an external 5.25" floppy disk drive:
1. Take suitable anti-static precautions as described in
the XEN-LS Owner's Handbook .
2. Switch off the computer and disconnect it from the
AC power supply. Remove the system unit cover,
the expansion card cage and the bridge assembly
as described in the XEN-LS Owner's Handbook .
3. If the computer has an internal diskette drive,
disconnect its ribbon cable from the motherboard
(underneath the bridge assembly) and from the
drive itself.
4. Take the ribbon cable with four connectors and
attach connector Z to the internal diskette drive (if
there is one).
CONNECT Z TO THE
INTERNAL FLOPPY
DISK DRIVE
Z
FRONT OF
MACHINE
TO THIS CONNECTOR
Y X
CONNECT X OR Y
11