Safety - Philips 26HF7875/10 User Manual

Safety

1. Two people are required to lift and
carry a TV that weighs more than 25
kilograms. Improper handling of the TV
can cause serious injury.
2. If you place the TV set on a solid surface,
ensure the surface is level and that it can
withstand the weight of the TV.
3. Mounting the TV on the wall requires
special skill that should only be
performed by a qualifi ed personnel.
You should not attempt to do the work
yourself. Philips bears no responsibility
for improper mounting or mounting that
results in accident or injury.
4. This TV is compatible with the VESA
wall mounting standard. Please contact
your local electronics supplier for a
VESA compliant bracket to wall mount
this TV. Before you mount your TV on a
wall, ensure the wall is suitable to carry
the weight of the TV.
5. Wherever you place or mount the
TV, ensure that air can circulate freely
through the ventilation slots. Do not
place the TV in a confi ned space.
6. Do not place naked fl ame sources such
as lighted candles close to the TV.
7. Do not expose the TV or the batteries
of the remote control to heat, direct
sunlight, rain, or water.
X
8. Do not place vessels fi lled with water on
top of or near to the TV. Spilling water
into the TV can result in electric shock.
If you spill water into the TV, do not
operate the TV.
Immediately disconnect the TV from
the mains and have the TV checked by a
qualifi ed technician.
X
9. Do not touch any part of the TV, power
lead, or aerial lead during lightning
storms.
10. Do not leave the TV in stand-by mode
for an extended period of time. Instead,
disconnect the TV from the mains.
11. The TV set is always connected to the
mains. You can disconnect the TV from
the mains by doing one of the following
tasks:
• unplugging the mains cord located at
the back of TV set
• unplugging the mains plug from the
mains socket outlet
Pull the power cord by the plug - do not
pull on the power cord.
12. Ensure that you always have easy access
to the mains cord or the mains plug to
disconnect the TV from the mains.
13. Ensure the power cord is fully inserted
into the TV mains socket and the wall
socket.
14. If the TV is mounted on a swivel base
or swivel arm, ensure no strain is placed
on the power cord when the TV is
swivelled. Strain on the power cord can
loosen connections and cause arcing or
fi re.
15. Verify that the mains supply voltage in
your home corresponds to the voltage
printed on the sticker at the rear of the
TV.
3