5. S-Video connection
Connect the S-Video cable between the
S-VIDEO IN socket of the TV / monitor and the
S-VIDEO OUT socket (6) of the Media Center.
Note:When using normal PC applications, picture quality may
not be optimal.
S-Video connection offers the best picture quality.
1 Connect the S-Video cable between the
S-VIDEO OUT socket of the video equipment and
one of the S-VIDEO IN sockets (3, 11) of the Media
2 Connect the stereo audio cinch cable between the
AUDIO OUT L/R sockets of the video equipment
and the AUDIO IN L/R sockets (5 or 13) of the
If your video equipment is only equipped with a SCART
output, you can use the SCART to SVHS / CVBS adapter to
connect the equipment to the Media Center.
1 Connect the SCART to SVHS / CVBS adapter to the
SCART connector of the video equipment.
2 Connect an CVBS cable (not supplied) between the yel-
low video connector of the adapter and the CVBS
input (4, 12) of the Media Center.
2 Connect the S-Video cable between the S-Video con-
nector of the adapter and one of the S-Video inputs
(VIDEO IN 1 - 3, VIDEO IN 2 - 11) of the Media
3 Connect the stereo audio cinch cable between the red
and white audio connectors of the adapter and the cor-
responding AUDIO outputs (5, 13) of the Media
Note: Upon using the S-Video connection, the picture may be
black & white.To solve this problem make sure that the
video equipment uses S-Video as output. For this see the
User manual that came with your video equipment.
(e. g. set-top box)
TV / Monitor
SCART / CVBS
SCART / S-Video