Subscribe to Our Youtube Channel
Related Manuals for Winmate M185D
Summary of Contents for Winmate M185D
- Page 1 User Guide User Guide User Guide Version 10.2. H The specification is subject to change without notice. Manufacturer assumes no responsibility for Error Contained here in Part No. 915211101022...
- Page 2 User Guide User Guide IMPORTANT SAFETY INSTRUCTIONS 16. If the product has been exposed to rain or water. Please read these instructions carefully before using the product and save for later 17. If the product does not operate normally when the operating instructions are followed. reference.
-
Page 3: Table Of Contents
User Guide User Guide 1. Introduction Contents 1-1 About the Product This product is a microprocessor-controlled to work with 18.5” TFT Introduction ------------------------------------------------------ 5 LCD panel. It is designed to meet the demanding performance About the Product ----------------------------------------------------- 5 requirements of today’s business and industrial applications. Notice -------------------------------------------------------------------- 5 1-2 Notice Check List --------------------------------------------------------------- 5... -
Page 4: Installing The Monitor
User Guide User Guide Supported symbologies: 2. Installing the Monitor The procedures for setting up your TFT LCD monitor kit is as follows: 2-1 Power & Signal Connections 2-1-1. Power: Switch off the power on both your monitor and your computer. The Power Switch is located in the center of the monitor. -
Page 5: Control Key Definition
User Guide User Guide 3-1 Control Key Definition value of setting, the value will be stored automatically. d. Exit the OSD menu To return the regular screen viewing, select the “EXIT OSD” item or press the Exit Key directly. If there is no command respond for 30 seconds, OSD menu will be closed automatically. - Page 6 User Guide User Guide IMAGE AUDIO You can adjust the value of screen quality automatically. You can adjust the setting of AUTO: Use to choose the speaker, including volume best settings for the current and mute. input signal VOLUME ADJUST: Use to ...
-
Page 7: Osd Menu On Hdmi Mode
User Guide User Guide 3-4 OSD Menu on HDMI Mode You can recall the factory default setting by selecting “YES”. Select “NO” to BRICONTRAST return the main menu. Press "+" to increase or "-" to decrease the brightness or contrast. ... - Page 8 User Guide User Guide COLOR RECALL You can fine tune the color temperature by USER option if necessary. You can recall the factory USER: Choose default setting by selecting “YES”. Select “NO” to RED/GREEN/BLUE to set value of color temperature return the main menu.
-
Page 9: Cleaning The Lcd Monitor
User Guide User Guide 4. Cleaning the LCD Monitor 6. Trouble Shooting If your monitor fails to operate correctly, consult the following chart for 1. Make sure the monitor is turned off. possible solution before calling for repairs: 2. Never spray or pour any liquid directly onto the screen or case. Condition Check Point 3.
Need help?
Do you have a question about the M185D and is the answer not in the manual?
Questions and answers