Steam Ironing; Ironing With Steam Blast; Temporarily Setting The Steam Iron Down; Taking The Steam Iron Out Of Service - Silvercrest DB 1400 B2 Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 4

Steam ironing

NOTE

Ironing with steam blast

The steam blast function is especially suitable for smoothing difficult-to-reach
parts of a garment.
1) Raise the steam iron slightly.
2) For a steam blast, press the steam blast button

Temporarily setting the steam iron down

1) Move the temperature control
2) Stand the steam iron only on the base

Taking the steam iron out of service

1) Remove the power plug from the mains power socket.
2) Empty the water tank and clean the sole of the iron
3) Place the cooled-down steam iron on the base
GB │ CY
10 
Set the steam control
The temperature control
no steam will be produced.
After steam ironing or when no more steam is needed, set the steam control
to the
position. Otherwise, water could drip from the sole of the iron
CAUTION! RISK OF FIRE!
Never leave a hot steam iron unattended if it is switched on or connected
to the mains power supply.
to the desired steam setting.
must be set to at least the
to the "MIN" position.
.
setting. Otherwise
.
.
.
DB 1400 B2
.

Advertisement

Table of Contents
loading

Table of Contents