Lobster Unlock Procedure; Nec-3G Incl. 338 V4 - Centurion Superclip Series User Manual

Centurion Clip User Manual

Lobster Unlock Procedure

Models: Lobster, 485, 575, 544
Clip Firmware V7.80 or V7.90
LED Sequence: On,
Phone: Powered Off
Connector PS2, Lobster Connector (3 types 485, 575, 544)
Lobster phones are grouped into 2 separate groups for unlocking
Each Group as it's stage on Lobster Unlock Mode on the Superclip
Stage identification: - (count the stages)
•
Waiting for ignition:- slow alternating between 2 & 3
•
About to change to next stage:- Fast alternating between 2 & 3
The Clip will run through the stages when you select LOBSTER and press the enter button.
Stage 1 / Group 1
485, 575
1. Switch on the Superclip and select Lobster
2. Connect up the phone. (No SIM, Powered OFF)
3. Press "Enter" button.
4. Press "Power" button on phone.
5. Wait for Superclip's LEDs to return to mode indication.
Phone unlocked.

NEC-3g incl. 338 V4

NEC-3g Unlock
Models: 228, 338, 313, 616 & 616v (338 V4 supported)
LED Sequence: Blinking, Blinking, On, On
Clip Firmware V7.80 or V7.90
Phone: Powered on
Connector PS2, GX-30 connecter
1. Switch the Superclip on and select NEC-3G mode
2. Ensure the Target phone is Powered On with no SIM
3. Connect to the Superclip.
4. Press the "Enter" button.
5. Wait for NEC to power down
6. Phone Unlocked
Page. 9
Off, Off, Off
Stage 2 / Group 2
544
http://www.centurionclip.com