Electrical Requirements For Brazil Only - KitchenAid 5KSM7586P Instructions Manual

STAND MIXER SAFETY
Electrical requirements (for Brazil only)
Residence mains:
The mains wires must be of copper
with a minimum cross-section per ABNT
(NBR-5410�)
To protect this appliance and the mains
against over loading, this appliance must
be connected to a circuit that is protected
with a thermo-magnetic circuit breaker�
If the household circuit does not include
a circuit breaker, contact an electrician
to have one installed�
Electric outlet:
For your safety and to avoid damage
to your product, it is very important
that your product is earthed correctly�
Your appliance power cord features a
3-pin-shaped hexagon-shaped plug,
10A, per ABNT (NBR 14136)�
Your residence electrical installation
must have a suitable electric outlet
for this type of plug� If not, it is your
responsibility to have one installed
by a qualified electrician�
6
Use appropriate outlet type for your
appliance plug, as shown below:
Before operating
this appliance, make
sure the main voltage
at the installation site
is the same as indicated
on product technical
data label�
This information is also included on the
label attached to your appliance's cord
near the plug�
IMPORTANT:
• If it is necessary to convert your
127V appliance to 220V, use a
1�0 KVA stabiliser�
• If it is necessary to convert your
220V appliance to 127V, use a
1�0 KVA stabiliser�
• Never plug your
appliance into
multi-plug adapters
with another
appliance in the same
socket� Do
not use an extension
cord� This type of connection may cause
electrical overload in the mains, and can
damage the appliance and could cause a
fire� The appliance should be plugged into
its own outlet�
• In case of oscillation in mains voltage,
install an automatic voltage stabiliser with
minimum rating of 1000 Watts between
the appliance and the socket�
• If the cord of this appliance is damaged, it
must be replaced� Contact your nearest
authorized KitchenAid Customer Care
Center�