Philips 7FF1WD/05 User Manual page 15

Copying Photos
file:///D|/EDFU/Digital_photo_Display/edoc/PhotoDisplay/english/b2_copy.htm (3 of 6)2005-08-02 ¤W¤È 11:04:59
• Use the or key to move,
from copy list, and then press the
Photos on the copy list are shown with a small copy icon
Do not remove the memory card or disconnect the camera before the copy screen
disappears upon completion.
If a warning message shows up indicating no free space for more photos, you may need
to remove some already stored photos first before copying more photos.
You may move to other Thumbnail pages and continue this process until all the photos
•
you want are copied to Photo Display.
Copying from PC to Photo Display via memory card (recommended)
-Select photos to be transferred to Photo Display and copy these photos directly under
the root directory of your memory card.
NOTE: Only JPEG format photos are supported. Sub-directories are not supported.
-Insert the memory card to Photo Display in power-off status
-Power-on Photo Display
After a few seconds, all photos in root directory of your memory card will be
automatically added to Photo Display. Photos in the root directory will stay intact after
copying.
Copying from/to PC directly
Requirements for a Windows system:
-Windows 2000/XP or later
Requirements for a Mac System:
-Mac OS X or later
Turn on Photo Display and connect the supplied PC USB cable to Photo Display.
•
Connect the PC USB cable plug to the PC.
•
PC will then recognize Photo Display as a mass storage device. (like a camera)
•
to add photos to copy list, to remove photos
to confirm the copy list.
.