Get Started; Install The Stand; Connect Power; Turn On The Photoframe - Philips SPF2017/12 User Manual

3 Get started

Caution
•
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Install the stand

To place the PhotoFrame on a fl at surface, you
need install the supplied stand at the back of
the PhotoFrame.
1
Insert the stand into the PhotoFrame.
2
Screw the stand into the stand hole fi rmly.
8 EN

Connect power

Note
•
When you position the PhotoFrame, ensure that the
power plug and outlet are easily accessible.
1
Connect the power cord to the DC
socket of the PhotoFrame.
b
2
Connect the power cord to a power
supply socket.

Turn on the PhotoFrame

Note
•
You can only turn off the PhotoFrame after all copy and
save actions are complete.
a