Set to factory default 9 Product information 10 Frequently asked questions 11 Glossary Need help? Please visit www.philips.com/welcome where you can access a full set of supporting materials such as user manual, the latest software updates and answers to frequently asked questions.
No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by Philips Service Centres and offi cial repair shops. Failure to do so shall void any warranty, stated or implied.
Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confi rms that if its products are handled properly for their intended use, they are safe to use according to scientifi c evidence available today.
SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. Banned Substance Declaration This product complies with RoHs and Philips BSD (AR17-G04-5010-010) requirements.
2 Your PhotoFrame Congratulations on your purchase, and welcome to Philips! To fully benefi t from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With your PhotoFrame, you can enjoy: • Digital photo • Home video •...
PhotoFrame Quick start guide Get started Play Setup • Quick Start Guide Overview of your PhotoFrame • Turn on/off the PhotoFrame • Play slideshow/music/video • Toggle between slideshow mode, browse mode, and calendar mode / / / • Select the previous/next/right/left option d OK •...
Page 8
SD/MMC/xD/MS/MS Pro • Slot for an SD/MMC/xD/MS/MS Pro card Kensington lock k Stand hole l Wall mounting hole m Speaker...
Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus.
Select a language, and press OK to confi rm. » Help message for control keys is displayed. Press any button to exit the help message. » Photos are displayed in slideshow mode. For other times: Press and hold for more than 1 second. »...
Connect PC Caution • Do not disconnect the PhotoFrame from the PC when fi les are transferring between the PhotoFrame and the Connect a suitable USB cable to the PhotoFrame and to the PC. » You can drag and drop fi les from the PC to the internal memory of the PhotoFrame.
4 Play Display photos Note • You can play only JPEG photos on the PhotoFrame. In the main menu, select [Photos] and then press OK to confi rm. » Available photo sources are displayed. Select a photo source, and then press OK to confi...
PhotoFrame. • For best compatibility, you can use bundled PC software, Philips PhotoFrame Manager (for Windows) to transfer video fi les to your PhotoFrame and play. In the main menu, select [Video] and then press OK to confi rm.
Play music Note • You can play only MP3 (MPEG Audio Layer III) music fi les on the PhotoFrame. In the main menu, select [Music] and then press OK to confi rm. Select a source, and then press OK to confi...
Page 15
Select [Yes], and then press OK to start play.
5 Browse photos in thumbnail mode and access photo menu You can browse multiple photos in thumbnail mode. In thumbnail mode, you can access the photo menu to edit photos. In the main menu, select [Photos] and then press OK to confi rm. •...
Press to access [Photo Menu] and manage the photo. • If the number of photos in the album is over 16, you can press to move to the next/previous 16 photos. Select a photo effect In [Photo Menu], select [Photo Effects] and then press OK to confi...
Press to zoom in a photo. • Press to zoom out a photo. Press / / / to crop the photo, and then press OK to confi rm. Select [Yes], and then press OK to confi rm. • Zoom and crop function is only applied to photos over 800 x 600 pixel.
6 Manage an album Create an album You can create an album on the PhotoFrame and on a storage device connected to the PhotoFrame. In the main menu, select [Photos] and then press OK to confi rm. Select a photo source, and then press OK to confi...
Rename an album Select an album. Press to access the album menu. Select [Rename Album], and then press OK to confi rm. » A keypad is displayed. To enter the new name (up to 24 characters), select an alphabet/number and then press OK to confi...
7 Slideshow Select slideshow sequence You can display the slideshow in sequence or randomly. In the main menu, select [Slideshow] and then press OK to confi rm. Select [Slideshow sequence], and then press OK to confi rm. Select an option, and then press OK to confi...
Select slideshow frequency In the main menu, select [Slideshow] and then press OK to confi rm. Select [Frequency], and then press OK to confi rm. Select a transition time, and then press OK to confi rm. Display collage photos In the main menu, select [Slideshow] and then press OK to confi...
Repeat steps 5 to 7 until all photos are selected for the format. Press to start collage display. • To stop collage display, select [Slideshow] > [Collage] > [Single] and then press OK to confi rm. • If you select a collage layout, the PhotoFrame displays a static collage and the slideshow mode is deactivated.
Page 24
» If you select [RadiantColor], the PhotoFrame extends the color on the edges of a photo that is smaller than the full screen to fi ll the screen without black bars or aspect ratio distortion.
8 Setup Select on-screen language In the main menu, select [Setup] and then press OK to confi rm. Select [Language], and then press OK to confi rm. Select [Language Setting], and then press OK to confi rm. Select a language, and then press OK to confi...
Protect/Unprotect content of memory card You can enable the delete function on a storage device available on the PhotoFrame. To avoid deleting photos on a storage device, you can also disable the delete function on a storage device. In the main menu, select [Setup] and then press OK to confi...
Set time and date format You can set the format of the time and date displayed on the PhotoFrame. In the main menu, select [Setup] and then press OK to confi rm. Select [Time and Date], and then press OK to confi rm. Select [Set time format] / [Set date format], and then press OK to confi...
Select [Time and Date], and then press OK to confi rm. Select [Show clock], and then press OK to confi rm. Select an option, and then press OK to confi rm. • [No clock] (No clock is displayed.) • [In slideshow] (Clock is displayed.) •...
Select [New reminder], and then press OK to confi rm. » A keypad is displayed. To enter the new name (up to 24 characters), select an alphabet/number and then press OK to confi rm. • To switch between uppercase and lowercase, select [abc] on the displayed keypad and then press OK to confi...
Select [Set time] / [Set date], and then press OK to confi rm. Press / / / and OK to set the time/ date, and then press OK to confi rm. • When the reminder alerts, you can press any button once to stop the reminder.
You can select a photo to display for a reminder. Each event reminder activates the latest defi ned photo only. If there is no defi ned photo, the reminder takes the default Philips start up photo. In the main menu, select [Setup] and then press OK to confi...
Select [Event Reminder], and then press OK to confi rm. Select [Snooze], and then press OK to confi rm. Select an options, and then press OK to confi rm. Set on Demo In the main menu, select [Setup] and then press OK to confi...
Set display auto on/off by time You can confi gure the time for the PhotoFrame to turn on or off the display automatically. Note • Ensure that you set the current time and date of the PhotoFrame before you set the auto on/off function. In the main menu, select [Setup] and then press OK to confi...
Press / / / and OK to set the time for auto-on/auto-off function, and then press OK to confi rm. • Weekday: Monday 00:00 to Friday 23:59 • Weekend: Saturday 00:00 to Sunday 23:59 Set auto orientation You can display photos in the correct orientation depending the horizontal/vertical orientation of the PhotoFrame.
Select [Set Beep], and then press OK to confi rm. Select [On] to turn on the button sound, and then press OK to confi rm. • To turn off the button sound, select [Off] and then press OK to confi rm. View status of the PhotoFrame You can fi...
Set to factory default In the main menu, select [Setup] and then press OK to confi rm. Select [Settings], and then press OK to confi rm. Select [Default], and then press OK to confi rm.
Stand • Quick Start Guide • CD-ROM, including • User Manual • Philips PhotoFrame Manager (Software and User Manual) Convenience • Card Reader: Built-in • Photo format supported: JPEG photo (Up to 10MB JPEG fi les, Up to 48 Megapixels) •...
Page 38
• System status: Firmware version, Remaining memory • Plug & Play Compatibility: Windows Vista, Windows 2000/XP or later • Regulatory Approvals: BSMI, C-Tick, CCC, CE, GOST, PSB, Switzerland • Other convenience: Kensington lock compatible • On-Screen Display languages: English, Spanish, German, French, Italian, Dutch, Danish, Russian, Simplifi...
10 Frequently asked questions Is the LCD screen touch-enabled? The LCD screen is not touch-enabled. Use the buttons on the back to control the PhotoFrame. Can I switch different slideshow photos by using different memory cards? Yes. When a memory card is connected to the PhotoFrame, you can play photos on the specifi...
11 Glossary Aspect ratio Aspect ratio refers to the length to height ratio of TV screens. The ratio of a standard TV is 4:3, while the ratio of a high-defi nition or wide TV is 16:9. The letter box allows you to enjoy a picture with a wider perspective on a standard 4:3 screen.