Safety
2
Safety
2.1
General safety instructions
2.1.1
Personel qualification
This description is only intended for trained specialists in control, automation and drive engineering who are
familiar with the applicable national standards.
2.1.2
Description of safety symbols
The following safety symbols and associated safety instructions are used in this document. These safety
instructions must be read and followed.
Serious risk of injury!
Failure to follow the safety instructions associated with this symbol directly endangers the
life and health of persons.
DANGER
Caution – Risk of injury!
Failure to follow the safety instructions associated with this symbol endangers the life ans
health of persons.
WARNING
Personal injuries!
Failure to follow the safety instructions associated with this symbol can be lead to injuries to
persons.
CAUTION
Damage to the enviroment or devices!
Failure to follow the safety instructions associated with this symbol can be lead to damage
to the environment or equipment.
Attention
Tip or pointer
This symbol indicates information that contributes to better understanding.
Note
UL note
This symbol indicates important information regarding UL certification.
6
Version: 1.1
Mains chokes AX2090-ND50