5. Remove the 2 nuts (A) and the plate (B).
A
B
6. Remove the air filter holder (A).
B
A
7. Remove the carburetor (B) and the carburetor
gasket (C).
20 - Repair instructions
C
8. Disconnect the fuel hoses from the carburetor.
9. Install in the opposite sequence.
6.7.2 To disconnect and connect the throttle cable
1. Remove the air filter cover. Refer to
install the air filter cover on page 15 .
2. Loosen the nut (A) and remove the throttle cable
guide (B) from the slot (C).
B
3. Push out the throttle cable stop (D) from the slot in
the throttle cable swivel (E).
4. Remove the throttle cable.
5. Install in the opposite sequence.
To remove and
D
A
E
C
1218 - 001 - 01.07.2019