Electrolux ESF8725RKX User Manual page 10

10 www.electrolux.com
indicators
the display is blank.
6.2 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying
to refill rinse aid. If the drying results are
satisfactory while using multi-tablets only,
it is possible to deactivate the notification
for refilling rinse aid. However, for best
drying performance, always use rinse
aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
How to deactivate the rinse aid
empty notification
Make sure the appliance is in user mode.
1. Press
• The indicators
off.
• The indicator
• The display shows the current
setting.
–
–
2. Press
3. Press the on/off button to confirm the
setting.
6.3 The rinse aid level
It is possible to set the released quantity
of rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Level 0 deactivates the rinse aid
dispenser and no rinse aid is released.
Factory setting: level 4.
, , and flash and
.
, and
still flashes.
= the rinse aid empty
notification is deactivated.
= the rinse aid empty
notification is activated.
to change the setting.
How to set the rinse aid level
Make sure the appliance is in user mode.
1. Press
• The indicators
off.
• The indicator
• The display shows the current
setting: e.g.
– The levels of rinse aid are
2. Press
setting.
3. Press the on/off button to confirm the
setting.
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic signal
is deactivated but it is possible to
activate it.
are
How to activate the acoustic
signal for the end of
programme
Make sure the appliance is in user mode.
1. Press
• The indicators
off.
• The indicator
• The display shows the current
setting.
–
–
2. Press
3. Press the on/off button to confirm the
setting.
.
, and
still flashes.
= level 4.
from 0A to 6A
where level 0A means rinse
aid is not used.
repeatedly to change the
.
, and
still flashes.
= the acoustic signal is
deactivated.
= the acoustic signal is
activated.
to change the setting.
are
are