English Français Español Deutsch Nederlands Italiano Svenska Dansk Suomi Português Polski Έλληνικά Clock radio Meet Philips at the Internet http://www.philips.com Printed in China PA234...
FUNTIONAL OVERVIEW 1 ALARM 2 - adjusts alarm time 2 RADIO ON/OFF -switches radio on/off 3 ALARM INDICTOR 4 REPEAT ALARM - - switches off the alarm for a 5 minute period - switches display backlight on/off 5 ALARM OFF/ON - switches alarm on/off. 6 VOLUME - adjusts the sound level 7 BAND - select FM-MW (or LW) waveband 8 TUNING - tunes to radio stations...
SETTING THE CLOCK 1. Pull out PULL-TIME SET and turn it to set the clock. Always push PULL- TIME SET back after setting the clock. 2. To read the time in the dark, press REPEAT ALARM - up as long as REPEAT ALARM - RADIO OPERATION 1 Press RADIO ON/OFF to switch on the radio.
• The radio or buzzer alarm sounds at the preset time. The alarm stops automatically after 50 minutes. • Buzz option - increases its beep tone frequency. 4 To doze for a few more minutes, press REPEAT ALARM - and sounds again after about 5 minutes. 5 To stop the alarm, push ALARM OFF/ON to the OFF position.
No sound/power – Volume not adjusted • Adjust volume – Batteries exhausted/wrong battery polarity • Insert fresh batteries/correctly. – Radio switches off by itself after 80 minutes. • This is not a problem, but the power-saving mode. Press the RADIO ON/OFF button again if you want to continue listening to the radio.