Detailed Input Memory Setting - Mitsubishi Electric NP180 Series Setup Manual

Narrow pixel pitch direct view led
Table of Contents

Advertisement

Detailed input memory setting

The following items are automatically adjusted
optimally at input signal auto-scanning. You can
modify them manually to display more complicated
signal types according to the necessity.
 Surely click the "Save" button after you change
the setting to store the setting in the control units
(p. 29).
Position, size
The input signal position and size can be arranged
by numbers.
Contrast, brightness
It adjusts the contrast and the brightness by input
signal. The initial settings are 100 and 0 respectively.
 The "Picture" menu in system memory (p. 32)
controls the contrast and the brightness by each
control unit display area.
36
NP180/160 Series Setup Manual
Aspect ratio
It modifies the aspect ratio of the input signal. The
initial setting is "Auto". The "Auto" setting follows
the result of memory scan (p. 29) or the ratio which
has been set in "H. size" and "V. size" menus in the
input memory.
 Other settings than "Auto", the image is
processed as specified without maintaining the
original aspect ratio.
Signal type
Signal types can be specified manually according to
input signals.
Interlace
When you display an interlace signal, its precise
scan mode can be selected manually.
Static: for static images in interlace signals
Adaptive: for motion images in interlace signals
Field judgment
Odd/even fields in interlace signals can be reversed
when hatched lines on an image are jagged. It is
available when the "Interlace" menu is other than
OFF.
Film mode
It sets a precise film mode for interlace signals. The
initial setting is "Auto". It analyzes the signals and
automatically
executes
processing. The film mode always selects an
optimal value regardless of the "memory scan"
result (p. 29).
Scaling filter
It makes jagged character outlines smooth. The
initial setting is 1. "2" makes them smoother than "1".
Frame lock
The display frequency can be synchronized with a
specified input signal by control unit display area.
The initial setting is OFF.
optimal
pull-down

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents