Wide-i SeaCam Operator’s Manual ® Safety Symbols In this operator’s manual and on the product, safety symbols are used to communicate important safety information. This section is provided to improve understanding of these symbols. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
Operator’s Manual Wide-i SeaCam ® nected. See the Flooding Repair Procedure cable into the monitor or VCR video-in jack (a for more information. BNC-to-RCA adapter may be required by the monitor/VCR in use). Flooding Repair Procedure 4. Lubricate the camera bulkhead connector with an appropriate silicone lubricant (spray type recommended), and using a linear motion plug the female inline connector into the male bulkhead...
Wide-i SeaCam Operator’s Manual ® RMA Procedure for Repair kind, the exclusive remedy being to require DeepSea Power & Light LLC to furnish such new parts. Under no circumstances shall the Buyer be entitled to recover any For warranty and non-warranty repairs, please contact incidental damages as that term is defined in Commercial DeepSea Power &...
Need help?
Do you have a question about the Wide-i SeaCam WSC-3060 Black and White and is the answer not in the manual?
Questions and answers