Wiring Instructions - Fantasia Elite Zeta Owner's Instruction Manual

2. Fan motor housing installation
Push down the decorative housing ring, then hang the motor housing on to the "HOOK"
that is on the mounting plate for wiring connection. Carefully use one of the holes,
not the slots to hang the fan

3. Wiring instructions

WIRING INSTRUCTIONS : Before doing wiring, ensure that you have all pole
disconnection of the electricity supply.
Your fan is supplied with a DC motor system and radio frequency remote control unit, and the
fan does not have a pull switch for speed control, the fan can only be controlled by remote
control. The DC motor system and remote control unit had been pre-assembly into the fan,
you just need to connect A.C. power to fan motor. Please see following step drawing
for wiring connection.
After hanging on the fan motor to hook on
the mounting plate.
Connect the A.C. power supply wire that
come from the ceiling to the Brown and blue
wire of terminal block which is mark with
label "L" & "N". In most cases, BROWN/RED
wire is LIVE is connected to "L" BROWN
wire, BLUE / BLACK wire is NEUTRAL is
connected to "N" BLUE wire. Connect
GREEN/YELLOW wire to EARTH.
6