Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Storm Audio ISP
Summary of Contents for Storm Audio ISP
- Page 1 Immersive Sound Processor Owner’s Manual Firmware version 3.5r1 onward...
-
Page 2: Important Safety Instructions
Important Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage “ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons . The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. -
Page 3: Table Of Contents
Table of Contents Test Tone Generator ..........16 Individual Channel Adjustments ......17 Important Safety Instructions ........2 Expert Bass Management ........19 Front Panel ..............4 Output Mapping ............19 Rear Panel ..............4 Multi-way Loudspeaker Setup ......20 General..............6 Channel EQ ............21 Welcome ............6 Child Theater / Sub Theater ........23 Included In The Box...........6 Zones ..............23 Features .............6... -
Page 4: Front Panel
Front Panel Rear Panel 1. Power Button 7. HDMI Use this button to toggle the ISP between ON 7 HDMI inputs and 2 outputs are available, with and STANDBY. Note that the rear panel switch two versions “7+2” or “7+2 eARC”. -
Page 5: Digital Inputs
Rear Panel Fan Analog Output From time to time, the ISP may automatically turn on the fan to draw cool air through the ISP Sixteen XLR analog audio outputs are provided and out the back. Do not obstruct the fan or by default which are fully assignable to any airflow vents on the chassis. -
Page 6: General
Plug the IEC-320 C14 end of the power • Available control modules for 3rd party cord into the ISP, then plug the other end into an automation systems available on the Client approved and grounded A/C receptacle. Portal at http://www.stormaudio.com... -
Page 7: Connect To Display
EDID conflicts. Note: Only one instance of control via web UI can be opened at a time. If a window is already accessing the I.ISP web UI, a Connect Audio Outputs message will ask you to close one. Browsers supported: Edge... -
Page 8: Web Ui Header Diagram
Alternate Speakers: If the optional 16 channel on. White indicates standby. RCA/DB25 Output Card is installed, you will see an Restart: Should you need to restart the ISP, you can • Alternate Speakers tab to the right of Main Speakers. - Page 9 Otherwise, you only have access to the remote control. 6. Help A unique feature of the ISP web UI is the comprehensive built in help function. With this switched to ON, every function on the web UI features a...
-
Page 10: System Settings
You can also download logs which can and populate IP Address, Gateway, Netmask, be sent to us for diagnostic purposes. and DNS fields manually. If an ISP has been set to static IP mode and will no longer connect to 2. Options and Licenses the network, see “Get Network Access”... - Page 11 This area permits a user logged in as installer to assign access to specific setup functions to the Expert User. For example, if the ISP is installed at property with technical staff, the installer may wish to permit the Expert User to...
-
Page 12: Input Settings
10 characters. Input Settings 3. Video In The ISP permits the installer to create access to sources in a very intuitive way for the end user. The For any given input, you can map separate installer is advised to title inputs thoughtfully and video and audio inputs except that when the without ambiguity. - Page 13 This range is 0-100ms in 1ms increments. 9. Triggers The ISP can trigger connected devices on using the 4 DC trigger output jacks on the back when a specific input is selected. Most commonly, this is used to power on the source component connected to a specific input.
-
Page 14: Building A Theater - Defining Channels
Any theaters or zones created appear to the right and are listed by their names which you assign. By default, the ISP ships with a 2 channel theater configured. To build your own, Definitions are titled by channel count in the delete this theater and create a new one. -
Page 15: Profiles
ISP Immersive Sound Processor Phantom Center: If no discrete center channel • speaker is present, checking this box will remove the center channel from the theater definition. Any changes made here can be visualized by clicking the PREVIEW button. Once your theater is Height defined properly, click SAVE to proceed. -
Page 16: Test Tone Generator
When a USB microphone (such as the optional Theater Acoustic Diagnostic Kit) is connected to the ISP, you can use the Real Time Analyzer to visualize the response of loudspeaker groups in the room. Note that the built in RTA 3. -
Page 17: Individual Channel Adjustments
ISP Immersive Sound Processor Signal approximate response of the system. Maximum level of the capture can be set by adjusting Mic Indicates which signal is routed to this output. Ref Level. Graph vertical scale can be changed Should you desire to remap signal routing, you from Logarithmic (default) to Linear. - Page 18 TiltEQ * Items 14 and 15 pertain to Standard Bass Management Mode in which the crossover point For speakers behind a motorized screen for and slope defined apply to both the high pass and example, you might need to change their low pass sides of the filter equally.
-
Page 19: Expert Bass Management
ISP Immersive Sound Processor audio that exceeds -3dBFS will be reproduced Large and Sub: Channel is not band limited, but a • copy of bass for this channel is routed to subwoofer at -3dBFS. By their nature, limiters are not ideal channels as well. -
Page 20: Multi-Way Loudspeaker Setup
/ oct and 48dB / oct), Linkwitz Riley (12dB / oct, 24dB configuration, more than 1 amplifier channel will / oct, 36dB / oct and 48dB / oct). be used per loudspeaker, and the ISP will perform 4. Delay the crossover function for each loudspeaker. -
Page 21: Channel Eq
ISP Immersive Sound Processor Channel EQ For LPF and HPF choose a type and slope amongst Butterworth (6dB / oct, 12dB / oct, Each channel can have up to 20 filters cells for 18dB / oct, 24dB / oct and 48dB / oct), Linkwitz... -
Page 22: Channel Select
This another channel without manually rebuilding gives a total flexibility for ISP users to go from a it for each identical channel. Select a channel fully automated approach with Dirac Live to a to copy the current filters to and click COPY. -
Page 23: Child Theater / Sub Theater
ISP Immersive Sound Processor Child Theater / Sub Theater theater, you have the option to retain that You may optionally create alternate speaker calibration for the child theater. definitions in your theater with some restrictions. 4. Save/Close For example, if you wish to have music playing Save when done, or Close to cancel. -
Page 24: Dirac Live
“Presets” on page 29 for more details. 4. Choose Theater or Zone to Calibrate Dirac Live From the Main Speakers (A) menu in the ISP web UI, EDIT (B) the theater or zone you wish Dirac Live is a highly advanced calibration tool to calibrate. - Page 25 Open the Dirac Live software on your laptop and enter your Dirac Account dredentials (A). It will scan the network and automatically find the ISP ready for calibration (B). If it does not, manually enter the IP address of the ISP (C). Select the device to calibrate.
- Page 26 In this last step, filters created in “Step 13. Target Curve” on page 26 are exported to the ISP and combined into the new profile selected “Step 5. Select Base Profile” on page 24. Click Proceed to filter design when done with...
-
Page 27: Settings Menu
These are only accessible to those with Installer your project for future use (C) before selecting level access or Expert User if assigned by the Export filter (D) and return to the ISP Web UI. Installer. Return to ISP web UI... -
Page 28: Parameters
POWER POWER ON POWER OFF Enable fast boot to substantially decrease power VOL UP on time of the ISP at the expense of greater standby VOLUME VOL DOWN power consumption. AUDIO MUTE INPUT NEXT... -
Page 29: Presets
By using presets, the installer can control when this preset is selected. make use of the ISP - a highly complex and capable theater controller - extremely simple and enjoyable 7. Triggers to operate. -
Page 30: Monitoring
Accessing the Monitoring page powered by Visualize audio output on the HDMI outputs StormMonitoring, you will get detailed information and XLR downmix outputs. about the operation of the ISP. 7. Logging 1. Product Information Logging is a useful feature to help identify... -
Page 31: Web Ui Remote Control
Remember that Preset includes Main Source) is not visible. The web UI remote activating a specific theater, so if your ISP includes control is best used with a computer or tablet. It multiple theaters, you should have presets available can be used with a mobile phone, but items do for each. -
Page 32: Ipad App
StormRemote from the App Store and control adjustments. Adjustments here are temporary their ISP using features identical to those found and reset to 0 with each change of Preset. in the web UI remote control. Once the app is •... -
Page 33: Specifications
ISP Immersive Sound Processor Specifications Control Audio Specifications Control Modules Avail- Crestron Audio Formats: Dolby Atmos able: Control 4 DTS:X Auro3D Savant + Legacy formats Rear panel I/O SphereAudio for head- phones DC Trigger 4 ea. Max Input Channels Software assignable to... -
Page 34: Installation Notes
Installation Notes... - Page 35 ISP Immersive Surround Processor DTS® is a registered trademark of DTS, Inc. Dolby® is a registered trademark of Dolby Laboratories. Auro-3D® is a registered trademark of Auro Technologies. All other trademarks are the properties of their respective owners. Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.
- Page 36 StormAudio | Immersive Audio Technologies 15 rue Olympe de Gouges | 44800 Saint-Herblain | France 05-16-2019 Version 1.0...
Need help?
Do you have a question about the ISP and is the answer not in the manual?
Questions and answers