IMPORTANT!
– When in Eco Power standby mode, it is
not possible to operate the clock or timer
function.
Clock setting
The system only supports 24-hour time mode.
1
In standby or view clock mode, press
CLOCK•TIMER once. In other source
mode, press CLOCK•TIMER twice.
2
Press à or á repeatedly to set the hour.
3
Press í or ë repeatedly to set the minute.
4
Press CLOCK•TIMER again to store the
setting.
➜
The clock starts working.
To exit without storing the setting
●
Press STOP Çon the system.
Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
– During clock setting, if no button is pressed
within 25 seconds, the system will exit clock setting
mode automatically.
Timer setting
The system can switch on to CD or TUNER
mode automatically at a preset time, serving as
an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
1
Press and hold CLOCK•TIMER for more than
two seconds to select timer mode.
➜
The last timer setting starts flashing.
➜
The selected source will be lighted.
2
Press DISC (CD 1/2/3) or TUNER to select
the desired source.
●
Before setting timer, make sure the music source
has been prepared.
CD – Load the disc(s). To start from a specific
track, make a programme (refer to "CD
Operation - Programming the disc tracks").
TUNER – tune to the desired radio station.
3
Press à or á repeatedly to set
the hour for the timer to start.
Clock/Timer
y
CD1/2/3
TUNER
AUX
MUTE
REPEAT
PROGRAM
SHUFFLE
VOL
TITLE
ALBUM
DISPLAY
DIM
SLEEP
TIMER
ON/OFF
DSC
DBB
23