Radio Reception; Tuning To Radio Stations; Storing Preset Radio Stations; Automatic Preset Programming - Philips FWM352/05 User Manual

Radio Reception

Tuning to radio stations

1
Press TUNER to select TUNER mode.
➜
"TUNER" is displayed. A few seconds later, the
current radio frequency will appear on the
display.
2
Press TUNER again to select the desired
waveband : FM or MW.
3
Press and hold à or á until the frequency
indication starts to change, then release.
➜
The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
4
Repeat step 3 if necessary until you find the
desired radio station.
●
To tune to a weak station, press à or á briefly
and repeatedly until optimal reception found.

Storing preset radio stations

You can store up to 40 preset radio stations in
the memory.

Automatic Preset Programming

1
Press TUNER to select TUNER mode.
To begin automatic preset from a desired
preset number
●
Press í or ë to select the desired preset
number.
18
MHz
➜
If a radio station has been stored in one of
the presets, it will not be stored again under
another preset number.
2
Press and hold PROGRAM until "AUTO" is
displayed.
➜
starts flashing.
PROG
➜ AUTO is displayed and available stations are
programmed in order of waveband reception
strength. The first preset automatically stored will
then be played.
➜
When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To stop storing the automatic preset
● Press PROGRAM or STOP 9 on the system.
Note:
– If no preset number is selected, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
y
CD1/2/3
TUNER AUX MUTE
REPEAT PROGRAM SHUFFLE
VOL
TITLE
ALBUM
DISPLAY
DIM SLEEP
TIMER
ON/OFF
DSC DBB