Switching the system on/off
●
Press STANDBY -ON B (B on the remote).
➜
"HELLO" is displayed briefly. The system will
switch to the last selected source.
●
Press SOURCE repeatedly (or DISC,
TUNER, TAPE or AUX on the remote).
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY -ON B (B on the remote).
➜
The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.
Sound Control
●
Press DSC repeatedly to select the desired
sound effect: FLAT, CLASSIC, JAZZ, POP or
ROCK.
●
Press DBB/INCREDIBLE SURROUND on
the system to switch on or off the surround
sound effect or bass enhancement.
●
You can also press DBB or IS on the remote to
turn on or off the DBB or IS function
respectively.
Note:
– The effect of INCREDIBLE SURROUND may
vary with different types of music.
Volume control
Turn the VOLUME control on the front panel
clockwise or anticlockwise or press VOL +/- on
the remote to increase or decrease the volume
level.
➜
"VOLUME XX" is displayed on the display
panel. "XX" denotes the volume level.
To listen through the headphone
●
Connect the headphone plug to the n socket
on the top of the back side of the DVD player.
➜
The speakers will be muted.
Basic Functions
To switch off the volume temporarily
●
Press MUTE on the remote.
➜
Playback will continue without sound and
"MUTE" flashes.
●
To activate sound reproduction, you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Microphone Mixing
IMPORTANT!
– You have to activate the "MIC
SETUP" option in the system setup
menu before using the karaoke function.
Connect a microphone (not supplied) to the
system to sing along with the music source.
1
Connect a microphone to the MIC jack.
●
Before connecting the microphone, set the
microphone level with VOL to the lower level to
prevent howling sound by turning the MIC VOL
knob.
2
In DISC mode, press SYSTEM MENU to
enter the system setup menu.
3
Press 22/33 on the remote to select
"AUDIO SETUP".
4
Press 5/4 to highlight "MIC SETUP". Then, press
33 or OK to enter its submenu.
5
Select "ON" with 5/4 and press OK to
confirm your selection. Then, press SYSTEM
MENU again to exit the system setup menu.
6
Press ECHO to increase or decrease the echo
between 00~08.
7
Start singing or talking through the microphone.
8
Press KEY to select the vocal key tone if
necessary.
Note:
– Keep the microphones away from the speakers
to prevent howling.
Key Control
This feature allows you to change the key tone
of your vocal range.
●
Press KEY on the remote to decrease or
increase the vocal key level between -6 and 06.
23