Basic Functions
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching the system on
● Press STANDBY -ON on the main set.
➜ The system will switch to the last selected
source.
● Press CD, TUNER, or MP3 LINK on the
remote control.
➜ The system will switch to the selected source.
To switch the system to standby mode
● Press STANDBY -ON (y on the remote
control).
➜ The volume level (up to a maximum volume
level of 15), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 30 minutes after CD playback has
ended and no control is operated.
10
Adjusting volume and sound
1
Adjust the VOLUME control
knob or press VOLUME
3/4 on the remote
control to increase or
decrease volume.
➜ Display shows the
volume level UOL and a
number from 0-40.
2
Press DBB to switch bass enhancement on or
off.
➜ Display shows: DBB if the DBB is activated.
3
Press DSC on the remote control repeatedly to
select the desired sound effect: CLASSIC, JAZZ,
POP, or ROCK.
➜ The selected DSC is shown.
4
Press MUTE on the remote control to stop
sound playback instantly.
➜ Playback will continue without sound and the
display shows MUTE.
● To start sound playback you can:
– press MUTE again;
– adjust the volume controls.