Safety Message to Installers of Federal Signal Warning Light Systems
The lives of people depend on your safe operation of Federal Signal Products. It is important to read and
follow all instructions shipped with the products. In addition, listed below are some other important safety
instructions and precautions you should follow:
•
Although your warning system is operating properly, it may not be completely effective. People may not
see or heed your warning signal. You must recognize this fact and continue driving cautiously.
•
Situations may occur which obstruct your warning signal when natural or man-made objects are between
your vehicle and others, such as: raising your hood or trunk lid. If these situations occur, be especially
careful.
• This product contains high intensity LED devices. To prevent eye damage, DO NOT stare into the light
beam at close range.
• At the start of your shift, you should ensure that the light is securely attached and operating properly.
RETAIN AND REFER TO THIS MESSAGE
Ordering Replacement Parts
To order replacement parts, please contact your local dealer/distributor or:
Customer Support
Federal Signal Corporation
Phone: 1-800-264-3578
7 AM to 5 PM, Monday through Friday (CT)
Getting Technical Support and Service
The factory will service the lightbars for you. If you are experiencing problems, please contact:
Service Department
Federal Signal Corporation
Phone: 1-800-433-9132
Fax: 1-800-343-9706
Email: empserviceinfo@fedsig.com
7 AM to 5 PM, Monday through Friday (CT)
Supplemental Instructions for the Vision SLR Lightbar with Standalone SignalMaster
Vision SLR Lightbar
5