Clock/Timer
M I C R O S Y S T E M M C M 2 0 4
Setting the clock
1
In standby mode, press and hold DISPLAY/
CLOCK on the set (or CLOCK on the
remote control) for 2 seconds.
➜
The clock digits for the hours flash.
2
Press TUNING 4 ¢ to set the hours.
3
Press DISPLAY/CLOCK again.
➜
The clock digits for the minutes flash.
4
Press TUNING 4 ¢ to set the minutes.
5
Press DISPLAY/CLOCK to confirm the time.
Note:
– The backlight for clock display is off in standby.
Setting the timer
●
The system can be used as an alarm clock,
whereby the CD or TUNER or USB is switched
on at a set time. The clock time needs to be set
first before the timer can be used.
1
In standby mode, press and hold TIMER about
2 seconds on the remote control.
2
Press SOURCE (or CD/USB/TUNER on the
remote control) to select sound source.
3
Press TIMER to confirm your desired mode.
➜
The clock digits for the hours flash.
4
Press TUNING 4 ¢ to set the hours.
5
Press TIMER again.
➜
The clock digits for the minutes flash.
6
Press TUNING 4 ¢ to set the minutes.
7
Press TIMER to confirm the time.
➜
The timer is now set and activated.
20
Notes:
– Timer is not available in TAPE or AUX mode.
– If CD source is selected and no disc is in the CD
tray or the disc has an error, TUNER will be
selected automatically.
– If USB source is selected and no compatible
USB device is plugged, TUNER will be selected
automatically.
ALBUM/
Activating and deactivating
TIMER
●
In standby or during playback, press TIMER
once.
➜
Display shows
deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time.
●
Press SLEEP on the remote
control once or more.
➜
Display shows
of the sleep time options in
sequence: 60, 45, 30,15, 0,
60... if you have selected a
time.
●
To deactivate, press SLEEP on the remote
control once or more until " 0" is shown, or
press STANDBY ON
system (or 2on the remote control).
➜
if activated, and disappears if
and one
ECO POWER
disappears from the display.
on the