M I C R O S Y S T E M M C M 2 0 4
IMPORTANT:
The lens of the CD player should never be
touched.
Loading a disc
This CD player plays Audio Discs including CD-
Recordables, CD-Rewritables and MP3 CD.
●
CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1
Select CD source.
2
Press OPEN/CLOSE3 on
the top of the system to open
the CD compartment.
➜
OPEN is displayed when
you open the CD
compartment.
3
Insert a disc with the printed side facing up and
press down on OPEN/CLOSE3 to close the
CD door.
➜
READING is displayed as the CD player
scans the contents of a disc, and then the total
number of tracks and playing time (or the total
number of albums and tracks for MP3 disc) are
shown.
Basic playback controls
To play a disc
●
Press 2; to start playback.
➜
The current track number and elapsed
playing time of the track are displayed during
disc playback.
To select a different track
●
Press TUNING 4 ¢ (on the remote
control 4 ¢) once or repeatedly until the
desired track number appears in the display.
ALBUM/
To find a passage within a track
1
Press and hold down on TUNING 4 ¢
(on the remote control 4 ¢).
➜
The disc is played at high speed and low
volume.
2
When you recognise the passage you want,
release TUNING 4 ¢ (on the remote
control 4 ¢).
➜
Normal playback continues.
To interrupt playback
●
Press 2; during playback.
➜
The display freezes and the elapsed playing
time flashes when playback is interrupted.
➜
To resume, press 2; again.
To stop playback
●
Press 9.
Notes: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE or TUNER.
– you select standby.
– you press the tape deck PLAY 2 key.
Playing an MP3 disc
1
Load an MP3 disc.
➜
The disc reading time may exceed 10
seconds due to the large number of songs
compiled into one disc.
➜
"YY XXX" is displayed. YY is the total album
number and XXX is the total track number.
2
Press ALBUM/PRESET 4 3 (or 4 3 on
the remote control) to select a desired album.
CD/MP3 Operation
13