Action Freeze Function; Switching Off; Temperature Regulation - Electrolux IG2085SN User Manual

6 www.electrolux.com
It is possible to change predefined sound
of buttons to a loudly one by pressing
together Mode and temperature colder
button for some seconds. Change is
reversible.
3.2 Display
A
A) Timer function
B) Drinks Chill function
C) Action Freeze function
D) Child Lock function
E) Alarm indicator
F) Temperature indicator
3.3 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off.
The alarm buzzer could operate after few
seconds.
The temperature indicators show the set
default temperature.
To reset the alarm refer to "High
temperature alarm".
To select a different set temperature refer
to "Temperature regulation".
If "dEMo" appears on the display, refer to
"What to do if..." chapter.

3.4 Switching off

1. Press the appliance ON/OFF button
for 5 seconds.
The display switches off.
2. Disconnect the mains plug from the
power socket.

3.5 Temperature regulation

Set the temperature of the appliance by
pressing the temperature regulator.
Default set temperature:
• -18°C for the freezer .
The temperature indicators show the set
temperature.
B C D E F
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.

3.6 Action Freeze function

1. Press the Mode button until the
corresponding icon appears.
The Action Freeze indicator flashes.
2. Press the OK button to confirm.
The Action Freeze indicator is shown.
This function stops automatically after 52
hours.
To switch off the function before its
automatic end repeat the procedure until
The Action Freeze indicator goes off.
The function switches off by
selecting a different freezer
set temperature.
3.7 DrinksChill function
The DrinksChill function is to be used to
set an acoustic alarm at the preferred
time, useful for example when a recipe
requires to cool down a mixture for a
certain period of time, or when a reminder
is needed in order not to forget the bottles
placed in the freezer for fast cooling.
1. Press Mode until the corresponding
icon appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Timer regulator to change
the Timer set value from 1 to 90
minutes.
3. Press OK to confirm.
The DrinksChill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the
DrinksChill indicator flashes and an audible
alarm sounds that indicates that any
drinks contained in the freezer
compartment should be removed and it is
necessary to press OK to switch off the
sound and terminate the function.
To switch off the function repeat the
procedure until the DrinksChill goes off.