Battery Pack Replacement Procedure; Notes On Replacement - NEC N8103-123 User Manual

45

3. Battery Pack Replacement Procedure

Refer to the server's manual to see the procedure of battery pack replacement.

3-1. Notes on replacement

Fill the year and month when the BBU is installed in the RAID Controller on the
setup date label and to put it on the battery cover.
Confirm whether the RAID Controller is recognized from system or not, after OS
started. For detail, refer to [2-2. Checking by Utility]
Universal RAID Utility may not able to recognize the battery pack if it is charged only
at the minimum level (or uncharged). If this occurs, charge the battery pack for nine
hours or longer. Then reboot the server and try to recognize the battery pack again
by using Universal RAID Utility.
Notice
The battery pack is recyclable. To inquire about it, contact your service
representative or bring it to the nearest recycle agent.
Tips
Set up Date
Y . M
Fill the year and month
2012 .
Example Y
4
M