Assembling The Pasta Sheet Roller And Pasta Cutters - KitchenAid KPRA Instructions And Recipes Manual

Assembling the Pasta Sheet Roller
To Attach: Remove "Do not immerse in
water" label, prior to use.
1. Turn mixer OFF.
2. Unplug stand mixer.
3. Depending on which type of hub you
have, either flip up hinged cover or
loosen attachment knob (A) by turning
it counterclockwise and remove
attachment hub cover (B).
A
B
4. Select Pasta Sheet Roller or Pasta
Cutter attachment. Insert attachment
shaft housing (C) into attachment hub
(D), making certain that power shaft
fits into square hub socket. Rotate
attachment back and forth if necessary.
When attachment is in proper position,
the pin on the attachment housing will
fit into the notch on the hub rim.
D
C
and Pasta Cutters
5. Tighten attachment knob (A) until Pasta
5
Sheet Roller or Pasta Cutter attachment
is completely secured to mixer. Please
refer to General Instructions in the stand
mixer Instructions and Recipe book.
A