Philips L01.2E AB Service Manual page 42

EN 42 8. L01.2E AB
Note: Name FM channel can be enabled only when
FM_RADIO = 1.
OP26: SMART_PICTURE
0 : Smart Picture is disabled or not applicable,
1 : Smart Picture is enabled,
Default setting : 1
OP27: SMART_SOUND
0 : Smart Sound is disabled or not applicable,
1 : Smart Sound is enabled,
Default setting : 1
AP30: AVL
0 : AVL is disabled or not applicable,
1 : AVL is enabled,
Default setting : 0.
OP31: WSSB
0 : WSSB is disabled or not applicable,
1 : WSSB is enabled,
Default setting : 0.
Note: This option bit can be set to 1 only when
WIDE_SCREEN = 1.
OP32: WIDE_SCREEN
0 : Software is used for 4:3 set or not applicable,
1 : Software is used for 16:9 set,
Default setting : 0.
OP33: SHIFT_HEADER_SUBTITLE
0 : Shift Header/Subtitle is disabled or not applicable,
1 : Shift Header/Subtitle is enabled,
Default setting : 0.
Note: This option bit can be set to 1 only when
WIDE_SCREEN = 1.
OP34: CONTINUOUS_ZOOM
0 : Continuous Zoom is disabled or not applicable,
1 : Continuous Zoom is enabled,
Default setting : 0.
Note: This option bit can be set to 1 only when
WIDE_SCREEN = 1.
OP35: COMPRESS_16_9
0 : COMPRESS 16:9 selection is not applicable. Item should
not be in the FORMAT menu list,
1 : COMPRESS 16:9 selection is applicable. Item should not be
in the FORMAT menu list,
Default setting : 0.
OP36: EXPAND_4_3
0 : Expand 4:3 selection is not applicable. Item should not be in
the FORMAT menu list,
1 : Expand 4:3 selection is applicable. Item should be in the
FORMAT menu list,
Default setting : 0.
OP37: EW_FUNCTION
0 : EW function is disabled. In this case, only Expand 4:3 is
allowed, Compress 16:9 is not applicable.
1 : EW function is enabled. In this case, both Expand 4:3 and
Compress 16:9 are applicable.
Default setting : 0.
OP40: STEREO_NON_DBX
0 : For AP_NTSC, chip TDA 9853 is not present,
1 : For AP_NTSC, chip TDA 9853 is present,
Default setting : 0.
OP41: STEREO_DBX
0 : For AP_NTSC, chip MSP 3445 is not present,
1 : For AP_NTSC, chip MSP 3445 is present,
Default setting : 0.
Alignments
OP42: STEREO_PB
0 : For AP_PAL, chip MSP3465 is not present,
1 : For AP_PAL, chip MSP3465 is present,
Default setting : 0.
OP43: STEREO_NICAM_2CS
0 : For EU and AP_PAL, chip MSP 3415 is not present,
1 : For EU and AP_PAL, chip MSP 3415 is present,
Default setting : 0.
OP44: DELTA_VOLUME
0 : Delta Volume Level is disabled or not applicable,
1 : Delta Volume Level is enabled,
Default setting : 0.
OP45: ULTRA_BASS
0 : Ultra Bass is disabled or not applicable,
1 : Ultra Bass is enabled,
Default setting : 0.
OP46: VOLUME_LIMITER
0 : Volume Limiter Level is disabled or not applicable,
1 : Volume Limiter Level is enabled,
Default setting : 0.
OP47: INCR_SUR
0 : Incredible Surround feature is disabled,
1 : Incredible Surround feature is enabled,
Default setting : 1
OP50: PIP
0 : PIP is disabled or not applicable,
1 : PIP is enabled,
Default setting : 0.
OP51: HOTEL_MODE
0 : Hotel mode is disabled or not applicable,
1 : Hotel mode is enabled,
Default setting : 0.
OP52: SVHS
0 : SVHS source is not available,
1 : SVHS source is available,
Default setting : 0.
Note: This option bit is not applicable for EU.
OP53: CVI
0 : CVI source is not available,
1 : CVI source is available,
Default setting : 0.
OP54: AV3
0 : Side/Front AV3 source is not present,
1 : Side/Front AV3 source is present,
Default setting : 0.
OP55: AV2
0 : AV2 source is not present,
1 : AV2 source is present,
Default setting : 0.
Note: For EU, when AV2=1, both EXT2 and SVHS2 should be
included in the OSD loop.
OP56: AV1
0 : AV1 source is not present,
1 : AV1 source is present,
Default setting : 0.
OP57: NTSC_PLAYBACK
0 : NTSC playback feature is not available,
1 : NTSC playback feature is available,
Default setting : 0.
OP60: Reserved
Default setting : 0.