Honeywell REDLINK ERM5220R Product Data page 17

10. Scroll down until "Remove Device" is highlighted.
Press "Select".
12. Scroll up or down until "Add Device" is highlighted in
screen. Then press "Select".
14. Press/release the "Connect" button on the ERM5220R. After releasing the button, the connected" LED should flash
green and then turn solid green.
Compressor
Boiler Connect
Connected
15. Back at thermostat, display will indicate that the Equipment Remote Module has been added. Press "Done".
11. Scroll down until "Equip Rem. Module" is selected.
And press "Select". Display says "Remove Equip. Rem.
Module?" Select "Yes".
13. The thermostat display says "Press Connect on New
Accessories".
Compressor
OR
Connected
MCR35661
17
ERM5220R EQUIPMENT REMOTE MODULE
Boiler Connect
MCR35662
33-00205—01