Panasonic MN101L Series User Manual page 345

Lsi
Table of Contents

Advertisement

Step
Setting
13
Set the timer mode register
14
Select the IGBT output pin
15
Enable the timer counter
TM7BC starts counting up from "0x0000". The IGBT output waveform is "High" until the TM7BC matches the
setting value of TM7OC2. The IGBT output waveform changes to "Low" at the TM7OC2 compare match.
The TM7BC continues counting up. The IGBT output waveform returns to "High" when the binary counter is
cleared by the TM7OC1 compare match.
The IGBT output waveform with dead time is output from the TM7IO pin.
The inverted IGBT output waveform with dead time is output from the TM8IO pin.
Register
TM7MD3.T7IGBTEN = 1
TM7MD2.TM7PWM = 1
TM8MD3.TM8SEL = 1
TM7MD1.TM7CL = 0
TMIOEN1.TM7OEN = 1
TMIOEN1.TM8OEN = 1
P0DIR.P0DIR4 = 1
P5DIR.P5DIR7 = 1
TM7MD1.TM7EN = 1
Description
Enable the IGBT output.
Select the IGBT output pin.
[Chapter 7 I/O Port]
Enable the timer count operation.
16-bit Timer
IGBT Output with Dead Time
Chapter 9
IX - 63

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mn101lr05dMn101lr04dMn101lr03dMn101lr02d

Table of Contents