Panasonic MN101L Series User Manual page 26

Chapter 1
Overview
<Timer 6>
- Function
- Clock Source : HCLK, HCLK/2
<Time Base Timer>
- Function
- Clock Source : HCLK and SCLK
- Interrupt generation cycle: 2
<Timer 7>
- Function
- Clock Source : Generated clock by dividing HCLK, SYSCLK, SCLK, or TM7IO input by 1, 2, 4 or 16.
<Timer 8 >
- Function
- Clock Source : Generated clock by dividing HCLK, SYSCLK, SCLK, or TM8IO input by 1, 2, 4 or 16.
<Timer 9 >
- Function
- Clock Source : Generated clock by dividing HCLK, SYSCLK, SCLK, or TM9IO input by 1, 2, 4 or 16.
* MN101LR03D and MN101LR02D
cannot be used square wave output, PWM output, event count and TM9IO.
<RTC time base timer (RTC-TBT)>
- Function
- Clock Source : SOSCCLK or SRCCLK
<Real Time Clock (RTC)>
- Function
• Buzzer Output/Inverted Buzzer Output
- Output frequency: f
* MN101LR02D can be used inverted buzzer output only.
• Serial Interface: 4 units
<Serial Interface 0, 1> (Full duplex UART/Clock synchronous serial)
- Function:
Full duplex UART:
Parity check, Detection of overrun error/framing error, Selectable transfer bits of 7 or 8
Clock synchronous serial (SPI compatible):
2,3 or 4-wire communication, MSB/LSB first selectable, multiple bytes transmission is available.
- Clock Source: external clock, dedicated baud rate timer
<Serial Interface 2, 3> (Multi-master IIC/Clock synchronous serial)
- Function:
Multi-master IIC
Clock synchronous serial (SPI compatible):
2,3 or 4-wire communication, MSB/LSB first selectable, multiple bytes transmission is available.
- Clock Source: external clock, dedicated baud rate timer
I - 4 Hardware Features
: One-minute timer can be generated in combination with a time base timer.
7
, HCLK/2
: An interrupt can be generated at a given set time.
N
/f , 2
HCLK
: Square wave output, PWM output (duty/cycle are programmable), one-shot pulse output,
IGBT output, event count, and input capture
: Square wave output, PWM output (duty/cycle are programmable), event count,
and input capture
: Square wave output, PWM output (duty/cycle are programmable), event count,
and input capture
: Clock generation for the Real Time Clock (RTC)
Frequency correction
(Correction Range: ±488 ppm to ±31220 ppm, Accuracy: approx. 0.48 ppm to 30.52 ppm)
: Calendar calculation, adjustment of leap year
Periodic interrupt (0.5 s, 1 s, 1 min, and 1 hour)
Alarm0 interrupt (date/month/minute), Alarm1 interrupt (month/day/hour/minute)
M
/2 (M = 9, 10, 11, 12, 13, 14), f
HCLK
13
, SYSCLK, SCLK, SCLK/2
N
/f (N = 7, 8, 9, 10, 12, 13, 14, 15)
SCLK
/2
SCLK
7 13
, SCLK/2
N
(N = 3, 4)