Table of Contents
Advertisement
6 Other features
Set alarm timer
Set alarm
In standby mode, you can set two alarms to
ring at different time.
Note
•
Make sure that you have set the clock correctly.
1
Press and hold AL1/AL2 for two seconds
to activate alarm setting mode.
The hour and minute digits begin to blink.
»
2
Press
/
and
set the hour and minute.
3
Press AL1/AL2 to confirm.
Select alarm source
Note
•
For alarm sound, you can select buzzer, your
last listened radio chanel, or latest played
audio in your iPod/iPhone.
Adjust AL1/AL2 RADIO·BUZZ·DOCK
control to select alarm source for both alarms.
Tip
•
When alarm time comes, the selected radio,
buzzer, or iPod/iPhone turns on.
•
If iPhone is selected as alarm source, while
no iPod/iPhone is connected, the clock radio
switches to buzzer source instead.
Activate/deactivate alarm timer
1
Press AL1/AL2 to view alarm settings.
2
Press AL1/AL2 again to activate or
deactivate the alarm timer.
The alarm icon appears if alarm timer
»
is on and disappears if it is off.
•
To stop the ringing alarm, press the
corresponding AL1/AL2.
/
repeatedly to
•
The alarm repeats ringing for the
next day.
Snooze alarm
When alarm sounds, press SNOOZE.
The alarm snoozes and repeats ringing
»
nine minutes later.
Set sleep timer
This clock radio can switch to standby mode
automatically after a preset period.
Press SLEEP repeatedly to select the sleep timer
period (in minutes).
When the sleep timer is activated,
»
appears.
To deactivate the sleep timer, press SLEEP
repeatedly until [OFF] (off) appears.
15
30
60
90
off
Play audio from an external
device
You can listen to audio from an external device
through this clock radio.
1
Connect the MP3 link cable to:
MP3 LINK socket.
•
the
•
the headphone socket of an external
device.
2
Press MP3 LINK to select MP3 link
source.
3
Start to play the external device (see the
user manual of this device).
Adjust display brightness
Press BRIGHTNESS repeatedly to select
different brightness levels.
120
EN
9
Advertisement
Table of Contents
