Change the internal Wi-Fi settings of
On the DS6800W conÀ guration web page,
you can change the internal Wi-Fi settings of
DS6800W for connection of DS6800W to
your existing home Wi-Fi network.
Make sure that the settings on the conÀ guration web
page match your home Wi-Fi network settings that you
wrote on paper.
Follow the on-screen instructions to
change and conÀ rm the internal Wi-Fi
settings of DS6800W.
» After a while, the indicator on the back
of DS6800W stops blinking and stays
green, and the unit beeps.
» DS6800W is connected to your
existing home Wi-Fi network
If the WI-FI SETUP indicator on DS6800W does not
stay green steadily, it means that the Wi-Fi connection
has failed. Please power off both your Wi-Fi router
and DS6800W and then power on them again to see
whether DS6800W can be connected to your home
Wi-Fi network. If the problem remains, try the above
After you À nish the above changes or power-off and
power-on of DS6800W, the new Wi-Fi network
created by DS6800W will disappear.
If you like, you can change the name of your DS6800W
in Advanced settings -> AirPlay Device Name on the
DS6800W conÀ guration web page. This is helpful when
you have multiple Philips AirPlay-enabled devices in
your house and you need to distinguish between them.
If you want to enter the network name (SSID) manually
(for example, if you want to hide your SSID), go to
Advanced settings -> CONFIGURE MANUALLY on
the DS6800W conÀ guration web page.
Restore your Wi-Fi enabled device
back to your existing home Wi-Fi
Make sure that the settings at steps 2 to 3 below match
your home Wi-Fi network settings you wrote on paper.
Select Settings -> Wi-Fi on your iPod
Or open the list of available Wi-Fi
networks on your PC/Mac.