Contents 1 Important Safety Notice 2 Your docking speaker Introduction What's in the box Overview of the main unit 3 Prepare Connect power Turn the unit on Adjut brightness 4 Play Listen to the iPod/iPhone Adjust sound Compatibility Charge the iPod/iPhone Play from an external device 5 Specifications Amplifier...
• Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the power. Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment.
Page 5
The correct disposal of these products helps prevent potentially negative consequences on the environment and human health. Please visit www.recycle.philips.com for additional information on a recycling center in your area. Environmental information All unnecessary packaging has been omitted.
Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No.
3 Prepare Always follow the instructions in this chapter in sequence. Connect power Caution • Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. • Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket.
4 Play Listen to the iPod/iPhone Load your iPod/iPhone. Play your iPod/iPhone. » Your music on the phone comes out through the device. Note • After docking your iPod/iPhone onto the device, the time on your iPod/iPhone is displayed on the panel of the device automatically.
Charge the iPod/iPhone When the system is connected to power, the docked iPod/iPhone begins to charge. Play from an external device You can also listen to an external audio player through the device. Connect the MP3 link cable to: • the AUX IN socket on the back of unit. • the headphone socket on an external audio player.
5 Specifications Amplifier Rated Output Power General information AC Power Y12FE-050-2000S (Philips) Input: 100-240 V ~, 50/60Hz; Output: DC 5.0V Operation Power <10 W Consumption Standby Power <1 W Consumption Dimensions - Main Unit 216 x 102 x 112 mm...
If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
Page 12
Philips Electronics Australia Limited and Philips New Zealand Limited In this warranty: We or us means Philips Electronics Australia Limited ACN 008 445 743 or Philips New Zealand Limited (Company Number 1723), and our contact details are set out at the end of this warranty;...