Philips DCB210/05 Quick Start Manual page 3

2
Setup
A
Set clock
1 In standby mode, press and hold TIME
SET/AUTO SCAN for 2 seconds.
» [SYNC ON] begins to blink.
2 Press TUNING +/- or PRESET +/- to
select a sync mode and press TIME SET/
AUTO SCAN to confirm.
» The 24H or 12H begins to blink.
3 Press TUNING +/- to select the clock
format .
» The hour digits begin to blink.
4 Press TUNING +/- to set the hour.
5 Press TIME SET/AUTO SCAN.
» The minute digits begin to blink.
6 Press TUNING +/- to set the minute.
7 Press TIME SET/AUTO SCAN to
confirm.
8 Press TUNING +/- to set the year,
month, and date.
9 Press TIME SET/AUTO SCAN to
confirm.
B Set the alarm timer
1 Ensure that you have set the clock
correctly.
2 Press and hold ALARM 1 or ALARM 2
for 2 seconds.
» The hour digits begin to blink.
3 Press TUNING +/- to set the hour.
4 Press ALARM 1 or ALARM 2 again.
» The minute digits begin to blink.
5 Press TUNING +/- to set the minute.
6 Press ALARM 1 or ALARM 2 to
confirm.
» The weekdays begin to blink.
7 Press TUNING +/- to select whether to
ring alarm on weekdays or weekend.
8 Press ALARM 1 or ALARM 2 to
confirm.
9 Press TUNING +/- to select alarm
volume.
10 Press ALARM 1 or ALARM 2 to
confirm.