Checking By Universal Raid Utility; Procedure For Raid Viewer (Windows Only) - NEC N8103-149 User Manual

53

2. Checking by Universal RAID Utility

After the installation, check the connections and settings of the BBU using the Universal
RAID Utility which is RAID controller management uitlity.

2-1. Procedure for RAID Viewer (Windows Only)

1. Open the RAID Viewer of Universal RAID Utility.
2. Confirm the setting of "Battery status" of RAID controller. There is no problem if
displayed as "Normal".
Indicates the status of the battery installed in the RAID Controller.
There 2 possible status are as follows:
If battery icon is not displayed, Check the connected condition of the battery
control cable.
Normal:
Warning:
Indicates that the
battery can be used
normally.
Indicates that the
battery cannot be used
normally due to some
reason.