ICP DAS USA PIR-230-WF Quick Start page 3

4
---------------------------------------------------------------------------
The factory default settings for Wi-Fi communication of the
PIR-230-WF are as follows.
Mode: AP

Wireless Security: WPA/WPA2, "00000000"

DHCP Server (AP Mode): DHCP Server on, start IP:

192.168.255.2
Wi-Fi Channel (AP Mode): 11

IP Address: 192.168.255.1

Gateway Address: 192.168.255.254

Subnet Mask: 255.255.0.0

SSID: PIR-230-WF

Modbus TCP Port: 502

The Wi-Fi IIOT Utility is provided to configure and test the PIR-230-WF
module through the Wi-Fi interface. Please refer to chapter 4 of the
user manual for details.
You can also use a browser to configure and test the PIR-230-WF
module through the Ethernet interface. Please refer to chapter 3 of the
Powering-on the PIR-230-WF logger