Advertisement
Quick Links
Download this manual
See also:
User Manual
Philips Portable DVD Player PET737
Quick start guide
Charge your battery
1
This portable DVD player is designed with a
built-in lithium battery to supply power to the
player when you are on travel.
1 Slide the POWER switch to the OFF
position (charging of the DVD player only
possible in the power-off mode).
2 Connect the supplied power adaptor cord (or
the car adaptor) to the player and AC mains (or
the car cigarette lighter outlet) to start charging.
➜ The CHG indicator turns red.
➜ When the battery is fully charged, the
indicator turns off.
3 Disconnect the power adaptor cord (or the car
adaptor) when the CHG indicator turns off.
Note:
– You can also connect the supplied power adaptor
cord (or the car adaptor) to the player and AC
mains (or the car cigarette lighter outlet) directly
wherever possible.
Enjoy (Disc operation)
2
1 Open the lid of the player.
2 Slide the POWER switch to ON to switch
on the DVD player.
➜ The POWER indicator turns on.
3 Press OPEN to open the disc door.
4 Remove the protective card (if any) and load a
disc with the label side facing up.
5 Close the disc door. Playback will start
automatically. If not, press 2;.
6 To stop playback, press 9.
Note:
– Once the battery is fully discharged, immediately
recharge it (regardless of whether you plan to use
the battery or not) in order to maximize the
battery life.When the power is low, the battery
icon will be shown on the upper-right corner of the
TFT for warning.
Enjoy (AV OUT)
2
Connecting additional equipment (TV
for example)
1 Connect the AV OUT socket on the set to the
video and audio sockets on a TV as shown directly.
2 Switch on the TV and set to the correct
video-in channel.
➜ You can consult the owner's manual of your
TV. (If your TV does not have Audio and
Video inputs, you will need to purchase a
RF modulator. Please consult your dealer.)
White
Not supplied
Red
Yellow
3 OPEN HERE
Enjoy (TV)
2
1 Connect the DVD player to the antenna as
shown.
2 In TV mode, press MENU.
3 Press 1, 2 to switch to PAL I.
4 In the TV menu, when AUTO SEARCH is
highlighted, press OK on the remote (2; on
the set).
➜ "AUTO SEARCH" is displayed.
➜ All available TV channels will be auto
searched and stored.
5 To stop searching, press MENU.
For details, seethe user manual.
TV
AUDIO IN
VIDEO IN
Printed in China
PDCC-ZYL-0813
Advertisement
