Page 1
AVMOD17 – WIRELESS TRANSMITTER/RECEIVER 2.4GHz WITH IR TRANSMITTER - 4 CHANNELS Figures and quick guide See figure 1, manufacturer's manual. Product Layout See figure 2 of the manufacturer's manual 1. Installation 1.1. Connect the transmitter to an A/V device See figure 3 of the manufacturer's manual See figure 4 of the manufacturer's manual 1.2.
• The connection method will be defined by your TV and the A/V component you're going to use (VCR, DVD player, etc). Read the manual of that device carefully and then connect the AVMOD17 according to the guidelines below : 1.
2.2. Power Supply 1. Connect the supplied power adapter with an outlet and connect the other end with the back of the receiver. See also figure 9. 2. Turn on the transmitter. The LED on the front panel should light. AVMOD17...
You can use your computer as a TV in conjunction with a video capture device or a TV tuner. You don't even have to run any cables between the computer and the A/V device. 1. Connect the mini plug of a mini RCA cable with the back of the receiver. AVMOD17...
• Do not use solvents or abrasives to clean the housing. • Only use the included power supply or a supply with identical technical specifications. • Avoid overcharging outlets or cables as this may lead to fire or electroshocks. AVMOD17...
Dimensions (B x H x D) 16.4 x 4.5 x 12.3cm Weight 300g per transmitter/receiver Power supply DC 9V, 300mA Operating temperature 0°C to +40°C The specifications can be subject to change without prior notice. AVMOD17...
Need help?
Do you have a question about the AVMOD17 and is the answer not in the manual?
Questions and answers