Digital Audio Setup; Setting The Analogue Output; Speaker Setup; Cd Upsampling - Philips DVP720SA/75 User Manual

Digital Audio Setup

The options included in Digital Audio Setup
are: 'Digital Output' and 'LPCM Output'.
1
In 'AUDIO SETUP PAGE', press 34 to
highlight {DIGITAL AUDIO SETUP}, then
press 2.
2
Press the 34 keys to highlight an option.
3
Enter its submenu by pressing 2.
4
Move the cursor by pressing the 34 keys
to highlight the selected item.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜
Off: Turn off the digital output.
➜
All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜
PCM Only: Only if your receiver is not
capable of decoding multi-channel audio.
Helpful Hint:
– If DIGITAL OUTPUT is set to 'All', all
audio settings except MUTE are invalid.
– You cannot hear or record the SACD
playback if you use the digital connection.
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust 'LPCM Output'.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
➜
48kHz: Playback a disc recorded at the
sampling rate of 48kHz.
➜
96kHz: Playback a disc recorded at the
sampling rate of 96kHz that can only be
achieved in Stereo-Classic mode.
Helpful Hint:
– LPCM Output can be selected only when
PCM Only is activated.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press
01-38 DVP720_752
DVD Setup Menu Options

Setting the analogue output

Set Analogue Output to match your DVD
Player's playback capability. This function
can also be accessed via the
SURROUND button on the remote.
1
In 'AUDIO SETUP PAGE', press 34 to
highlight {ANALOG OUTPUT}, then
press 2.
STEREO
Select this to change channel output to
stereo which delivers sound from only
the two front speakers and subwoofer.
MULTI-CHANNEL
Select this to enable Multi-channel output.
2
Press 34 to select a setting, then press
OK to confirm your selection.

Speaker Setup

This menu contains setup options for your
audio output which makes the speaker
setup system reproduce high quality
surround sound. For details, see page 15.

CD Upsampling

This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality.
1
In 'AUDIO SETUP PAGE', press 34 to
highlight {CD UPSAMPLING}, then press 2.
OFF
Select this to disable CD-upsampling.
88.2 kHz (X2)
Select this to convert the sampling rate of
the CDs twice higher than the original.
176.4 kHz (X4)
Select this to convert the sampling rate of
the CDs four times higher than the original.
2
Press 34 to select a setting, then press
OK to confirm your selection.
Helpful Hint:
– CD upsampling feature is only applicable
to stereo output setting.
SYSTEM MENU
25
.
3139 246 13512
3/08/2004, 4:52 PM
25