Operation With Divx Disc; Playing A Divx Movie Disc; Video Mode Setting - Philips DVP721VR/05 User Manual

Playing a DivX Movie Disc

This DVD+VCR can play DivX movie disc.
1 Insert a disc and close the tray.
The MOVIE menu appears on the TV screen.
2 Press 3/4 to select a folder then press OK.
A list of files in the folder appears. If you are in a file list
and want to return to the Folder list, use the 3/4
buttons on the remote to highlight "
3
If you want to view a particular file, press 3/4 to
highlight a file and press OK or PLAY B.
4
Press STOP to exit.
Tips
Press DISC MENU to move to the next page.
On a CD with MP3, JPEG and MOVIE file, you can switch
MUSIC, PHOTO and MOVIE menu. Press TITLE and
MUSIC, PHOTO and MOVIE word on top of the menu is
highlighted.
DivX disc compatibility with this player is limited
as follows:
Available resolution size of the DivX file is under 720x576
(W x H) pixel.
The file name of the DivX subtitle is available by 56
characters.
If there is impossible code to express in the DivX file, it
may be displayed as " _ " mark on the display.
If the number of the screen frame is over 30 per 1
second, this unit may not operate normally.
If the video and audio structure of recorded file is
not interleaved, either video or audio is outputted.
If the file is recorded with GMC, the unit supports
only 1-point of the record level.
* GMC?
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4 encoders, like DivX or Xvid, have this option.
There are different levels of GMC encoding, usually called
1-point, 2-point, or 3-point GMC.

Operation with DivX Disc

Playable DivX file
".avi ", ".mpg ", ".mpeg "
Playable Codec format
"DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable Audio format
"AC3 ", "DTS ", "PCM ", "MP3 ",.
• Sampling frequency: within 8 - 48 kHz (MP3),
• Bit rate: within 8 - 320kbps (MP3)

Video Mode Setting

DVD
VCD2.0
With certain discs, the playback picture may be flickering
" and press OK
or Dot Crawl is shown on straight lines.That means
Vertical interpolation or De-interlace is not perfectly
matched with the disc. In this case, the picture quality may
be improved by changing the video mode.
To change the video mode, press and hold DISPLAY about
3 seconds during disc playback.The new video mode
number selected is displayed on the TV screen. Check
whether the video quality has improved. If not, repeat the
above procedure until picture quality is improved.
Video mode sequence:
MODE1
If you turn off the power, the video mode will return to
initial default state (MODE1).
Detailed Description of each Video Mode
MODE1 :The source material of the DVD video (film
material or video material) is determined from disc
information.
MODE2 : Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE3 : Suitable for playing video based content with
comparatively little motion.
Note
The video mode setting only works when the Progressive
Scan mode is set to "On" on the setup menu.
VCD1.1
MODE2 MODE3 MODE1
DivX
33