Table of Contents
Advertisement
Connections
Optional: Connecting to an
Audio System
STEREO
CVBS
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital
COAXIAL OPTICAL
Pr
S-VIDEO
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1
Select one of the video connections
(CVBS VIDEO IN, S-VIDEO IN, SCART or
COMPONENT VIDEO IN) depending on
the options available on your TV.
2
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable not supplied).
12
OPTICAL
AUDIO
OUT
DIGITAL
Y
L
R
Pb
TV OUT
STEREO
Optional: Connecting Digital AV
Receiver
OPTICAL
AUDIO
OUT
DIGITAL
OR
CVBS
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital
COAXIAL OPTICAL
S-VIDEO
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1
Select one of the video connections
(CVBS VIDEO IN, S-VIDEO IN, SCART or
COMPONENT VIDEO IN) depending on
the options available on your TV.
2
Connect the COAXIAL or OPTICAL jack
of the DVD Player to the corresponding
Digital Audio In jack on your Receiver
(cable not supplied).
3
Set the DVD Player's Analog Output to
'Stereo' which delivers sound from only
the two front speakers. (see page 30
"Setting the analogue output").
Helpful Hint:
–
If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
AV Receiver
Y
Pr
Pb
TV OUT
Advertisement
Table of Contents
