Sound Mode; Cd Upsampling - Philips DVP3005K/69 User Manual

Sound Mode

The options included in Sound Mode
Setup are: '3D', 'Movie Mode' and 'Music
Mode'.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {SOUND MODE}, then press 2.
2
Press the 3 4 keys to highlight an option.
3
Enter its submenu by pressing 2.
4
Press 3 4 to select a setting, then press
OK to confirm your selection.
3D
This function provides a virtual surround
sound experience using just two speakers.
➜
Off, Living Room, Hall, Arena and
Church
Movie Mode
Select a Sound Mode that matches the
type of music you are playing. These
preset Sound Modes adjust the frequency
bands of the video to enhance your
favourite movie sound track.
➜
Off, Sci-Fic, Action, Drama and
Concert
Music Mode
Select a Sound Mode that matches the
type of music you are playing. These
preset Sound Modes adjust the frequency
bands of the audio to enhance your
favourite music.
➜
Off, Digital, Rock, Classic and Jazz
To return to the previous menu, press 1.
TIPS:
To remove the menu, press
01-37 DVP3005K_691
DVD Setup Menu Options

CD Upsampling

This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you have activated
the upsampling, the player will
automatically switch to stereo mode.
1
In 'AUDIO SETUP PAGE', press 3 4 to
highlight {CD UPSAMPLING}, then press 2.
OFF
Select this to disable CD-upsampling.
88.2 kHz (X2)
Select this to convert the sampling rate of
the CDs twice higher than the original.
176.4 kHz (X4)
Select this to convert the sampling rate of
the CDs four times higher than the
original.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
Helpful Hint:
– CD upsampling feature is only applicable
to stereo output setting.
SYSTEM MENU
29
.
3139 246 15771
27/05/05, 2:05 PM
29